Mini Articulated Wheel Loader For Being Used In More Heavy-Duty Projects
1. Products Description of MCLLROY Wheel Loader
In general, for construction machinery, the four most important factors are: price, quality, operation, and after-sales.
The amount of shovel material and the stability of the loader depend on the cooperation of the loader frame.
The flexibility and light operation mainly depends on the hydraulic system of the loader.
The low failure rate depends on quality as well as the after-sales service.
MCLLROY wheel Loaders are widely used in the construction, municipal engineering, urban and rural gardens, lime, sand, cement factories, mines and other enterprises and institutions and departments. It is particularity applied to the narrow space for the loading operation of stone,sand and other construction materials.
2. Specification of MCLLROY Wheel Loader
| MCL946 | Metric Units |
| Engine Model | Yunnei 4102 Supercharged |
| RPM | 2400 |
| Rated Power | 76 kW |
| Emissions | EU Stage II |
| Operating Weight | 6350 kg |
| Rated Load | 2200-2500 kg |
| Bucket Capacities | 1.4 m³ |
| Max. Travel Speed | 45 km/h |
| Gear Box | CVT
300 split torque converter |
| Axle | Large hub |
| Axle Base | 2600 mm |
| Brake | Air Brake |
| Hydraulic Cycle time - lift | ≤ 10 s |
| Min. Ground Clearance | 370 mm |
3. Details and Advantages of MCLLROY Compact Wheel Loader
1) Dual high and low speed gearboxes and handles for quick switching between work and travel modes.
2) The visual skylight design makes overhead shovelling and unloading operations more convenient.
3) The cab has a wide field of view, which facilitates work in all directions and safe walking.
4) Uses engineering tyres with a rubber content of over 38% .
4.Production lines of MCLLROY Wheel Loader
A complete production process mainly includes: material procurement-steel plate cutting-welding-spray painting -drying-assembly-inspection
Assembly:
Our factory arrange seven steps for assembly. There are over a thousand parts in a loader. I will talk about assembly of major components.
The sixth step of assembly:
Install cylinder liner for boom, tilt arm and pull rod, install lifting and tilting cylinder, install pull rod and boom. And then use crane to connect the working part to the loader body, connect the pipeline.
There are many sleeves and pins involved in this step.
The connection between the boom, tilt arm and cylinder must rely on the sleeve and the pin, and the connection part should not be too loose or too tight. Then what is suitable? The diameter of the arm hole in the boom is 10 centimeter larger than the outer diameter of the sleeve.
our worker must use a lot of effort here. When they smash the pin with a rubber hammer, pay attention not to damage the parts and welded joints.
we will also put a circle of flower cap bolts outside the pin of the middle arm to reinforce the pin. This is a unique design of our product. Remember the articulated bearing? This flower cap is also used in articulated bearings. It is mainly used in places with high stress and easy to wear.
2-3 workers are in this step.
CM Issued
Product Tags:
|
|
Mini Articulated Wheel Loader For Being Heavy Duty Projects Images
|
